



search

search

search
Piece measures: Sack of 4kg
Valid for: Interior and exterior
Installation: Floor and wall
Decorative resin-cement in a blueish green hue for grouting tiles, mosaics, stones and marble.
Among its technical characteristics, we highlight its water repellency, very low water absorption, high surface hardness, high resistance to the most common acid substances and total colour uniformity.
For 2mm joints, which is what we recommend, a 4kg sack can cover approx:
- 6 m2 in small elongated formats such as 7,5x30
- 13 m2 in formats up to 20x20cm
- 30 m2 in 60x60cm formats
- 20 m2 in wooden formats such as 15x90cm or 20x120cm
- 40 m2 in formats 60x120cm
- 45 m2 in 100x100cm formats
These data are approximate, they may vary depending on the thickness of the piece, the installer, etc., so it is advisable to ask for more material.
THIS PRODUCT IS MADE TO ORDER, THEREFORE, RETURNS ARE NOT ACCEPTED.
Usage: All types of ceramic tiles, Marbles, Mosaics, Stones
Allowable joint width: From 1 to 20 mm
Mixing ratio: 0.23 liters of water for each KG of powder
Conservation: 12 months in a dry place in original packaging
Application temperature limit: From +5º to +35º
Transitability: It is advisable to wait 24 hours for traffic on the grouted surface
Mixing time: Approximately 30 minutes
Consumption: See the table in the attached PDF or consult the manufacturer's website in the product description.
Cleaning: Clean the surface when the joint has thickened, with a coarse sponge and clean water. Work in a rotating and diagonal direction to avoid removing material. Remove the remains with water before the material hardens.
Color: Green
Type of product: Cementitious joint
Frost resistant: No